WelcomeWebsite! If you have any questions, please call !
Flammability tester,burning tester,Fire Retardant Fabrics Tester_QINSUN

Hotline:

Product

News

Company:-Qinsun Instruments Co., Ltd.
Phone:+86-17740808215
Tell:+86-21-6780 0179
Email:info@qinsun-lab.com
Address:No.2578 Minhang District Gu Dai Road, Shanghai

Flammability Testing of Materials

Position: Home > News

Flammability Testing of Materials

Author: Date :2018-12-29 Views: order
Fire Testing of Materials:
Qinsun performs fire and flammability testing for materials and large scale building products, surface burning characteristics (Steiner tunnel), small-scale flammability, and flammability testing of furniture (or other consumer goods) for both residential and commercial markets. With state-of-the-art equipment and laboratories, our team is ready to guide you through the process of testing your products to the desired standards.
 
Large Scale Building Products:
Qinsun performs many tests for large scale fire and flammability testing for materials at various locations with state of the art equipment, and knowledgeable personnel. A brief list of standards we test against:
ASTM E119 – (Equivalent to ANSI/UL 263 and NFPA 251)
CAN/ULC S101 – Standard Methods of Fire Endurance Tests of Building Construction and Materials
ASTM E814 – Standard Test Method for Fire Tests of Penetration Firestop Systems
CAN/ULC S115 – Standard Method of Fire Tests of Firestop Systems
NFPA 286 – Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth, 2011 Edition
UL 1715 – Fire Test of Interior Finish Material
NFPA 275 – Standard Method of Fire Tests for the Evaluation of Thermal Barriers Used Over Foam Plastic Insulation
UL 10B – (Equivalent to UBC 7-2) – Fire Tests of Door Assemblies
CAN/ULC S104 – Standard Method for Fire Tests of Door Assemblies
CAN/ULC S134 – Standard Method of Fire Test of Exterior Wall Assemblies
ASTM E108 – (Equivalent to UL 790, UBC 15-2) Standard Test Methods for Fire Tests of Roof Coverings
CAN/ULC S107 – Methods of Fire Tests of Roof Coverings
 
Surface Burning Characteristics (Steiner Tunnel) Testing:
Qinsun performs the following surface burning characteristics testing at various locations with state of the art equipment, and experienced test professionals.
ASTM E84 – Standard Test Method for Surface Burning Characteristics of Building Materials (Equivalent to UL 723, NFPA 255, UBC 8-1)
ASTM E2768 – Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
CAN/ULC S102 – Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies
CAN/ULC S102.2 – Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies
UL 1887 – Fire Test of Plastic Sprinkler Pipe for Flame and Smoke Characteristics
UL 1256 ?- Fire Test of Roof Deck Constructions
CAN/ULC S126 – Standard Method of Test for Fire Spread Under Roof-Deck Assemblies
 
Small-Scale Materials Flammability Testing:
ASTM D1929 – Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D635 – Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
UL 94 – Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
ASTM E136 – Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
CAN/ULC S114 – Standard Method of Test for Determination of Non-Combustibility in Building Materials
ASTM D2843 – Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM E162 – Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
NFPA 701 – Standard Methods of Fire Tests for Flame Propagation of Textiles and Films, 2010 Edition
 
Mattress Testing:
16 CFR 1633 – Open Flame Testing of Mattress Sets (Federal)
16 CFR 1632 – Cigarette Resistance Testing of Mattresses and Mattress Pads (Federal)
ASTM E1590 – Fire Testing of Mattresses
Cal TB 129 – Fire Testing of Mattresses for Public Occupancies
Cal TB 121 – Fire Testing of Mattresses for High Risk Occupancies
BFD IX-11 – Mattress Fire Test (Boston Area)
 
British Standard Testing:
*BS 7175 – Methods of Test for the Ignitability of Bed covers and Pillows by Smouldering and Flaming Ignition Sources *BS 7177 – Specification for Resistance to Ignition of Mattresses, Mattress pads, Divans and Bed Bases *BS 6807 – Methods of Test for Assessment of Ignitability of Mattresses, Upholstered Divans and Upholstered Bed Bases *BS EN 597 – Assessment of the Ignitability of Mattresses and Upholstered Bed Bases
 
Upholstered Furniture:
Cal TB 133 – Flammability Testing of Seating for Public Occupancies
ASTM E1537 – Fire Testing of Upholstered Furniture
BFD IX-10 – Regulation of Upholstered Furniture (Boston Area)
Cal TB 117 – Flammability Testing of Components of Upholstered Furniture
Furniture and Furnishings (Fire) (Safety) Regulations
NFPA 260 – Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture
 
British Standard Testing:
* BS 7176 – Specification for Resistance to Ignition of Upholstered Furniture for Non-Seating by Testing Composites
* BS 5852 – Methods of Test for Assessment of the Ignitability of Upholstered Seating by Smouldering and Flaming Ignition
Sources * BS EN 1021 – Assessment of the ignitability of upholstered furniture

 

Phone:+86-17740808215 Tell:+86-21-6780 0179 Address:No.2578 Minhang District Gu Dai Road, Shanghai Email:info@qinsun-lab.com sitemap