WelcomeWebsite! If you have any questions, please call !
Flammability tester,burning tester,Fire Retardant Fabrics Tester_QINSUN

Hotline:

Product

News

Company:-Qinsun Instruments Co., Ltd.
Phone:+86-17740808215
Tell:+86-21-6780 0179
Email:info@qinsun-lab.com
Address:No.2578 Minhang District Gu Dai Road, Shanghai

5 Common Mistakes to Avoid When Using the UL94 Flame Chamber

Position: Home > News

5 Common Mistakes to Avoid When Using the UL94 Flame Chamber

Author: Date :2023-04-25 Views: order

The UL94 Flame Chamber is a device used to test the horizontal and vertical flammability of plastic materials when exposed to flame.The test results of the UL94 Flame Chamber can provide a preliminary indication for the selection and application of plastic materials. However, there are some common errors when testing with the UL94 Flame Chamber that can affect the accuracy and reliability of the test. This article will cover 6 common mistakes to avoid when using the UL94 Flame Chamber to help you improve the quality and efficiency of your testing.


Mistake 1: Using a substandard flame source

The flame source for UL94 Flame Chamber must meet the requirements of ASTM D5025 or ISO 10093, with the specified shape, size, temperature and flow rate. Using a non-conforming flame source may result in an unstable, uneven or oversized flame, affecting the consistency and comparability of test results. Therefore, before each test, the flame source should be calibrated and checked to ensure that it meets the standard requirements.


Mistake 2: Using an unsuitable specimen holder

The specimen holder of UL94 Flame Chamber must be able to hold the specimen securely and be able to be adjusted horizontally or vertically according to the different testing methods. Using an unsuitable specimen holder may cause the specimen to move, tilt or fall off, affecting the accuracy and repeatability of the test results. Therefore, before each test, a suitable specimen holder should be selected according to the shape, size and weight of the specimen, and the specimen holder should be properly installed and adjusted.

5 Common Mistakes to Avoid When Using the UL94 Flame Chamber(图1)


Mistake 3: Using non-standard specimens

UL94 Flame Chamber specimens must conform to the shape, size, thickness and quantity specified in the standard. The use of non-standard specimens may result in test results that do not match the actual situation, or that cannot be effectively compared and analyzed. Therefore, before each test, specimens should be cut, ground, cleaned and marked according to the standard requirements, and tested within the specified time.


Mistake 4: Using incorrect flame angles

The flame angle of UL94 Flame Chamber must be adjusted according to different testing methods, generally 0°, 20° or 45°. Using an incorrect flame angle may result in inadequate or excessive flame contact with the specimen, affecting the representativeness and sensitivity of the test results. Therefore, the flame angle should be adjusted according to the standard requirements before each test, and the flame angle should be kept constant during the test.

5 Common Mistakes to Avoid When Using the UL94 Flame Chamber(图2)


Mistake 5: Using improper ignition time

The ignition time of UL94 Flame Chamber must be controlled according to different test methods, generally 10 seconds, 30 seconds or 120 seconds. The use of improper ignition time may result in too little or too much flame on the specimen, affecting the determination and classification of test results. Therefore, before each test, the ignition time should be set according to the standard requirements and the ignition time should be accurately controlled during the test.


Phone:+86-17740808215 Tell:+86-21-6780 0179 Address:No.2578 Minhang District Gu Dai Road, Shanghai Email:info@qinsun-lab.com sitemap