The horizontal and vertical combustion tester is a test equipment used to test the combustion performance of materials. In order to ensure the safety and accuracy of the test, some safety regulations and operating procedures need to be followed. The following is a specific introduction:
Safety regulations:
1. Before operating the tester, you must be familiar with the structure, performance and operation method of the tester, and follow the operating procedures in the instruction manual.
2. When operating the tester, you must wear protective gloves, safety glasses and other personal protective equipment to prevent the smoke and sparks generated by combustion from causing harm to the human body.
3. During the test, the surrounding environment of the tester must be kept dry and well ventilated to prevent the harmful gas produced by combustion from causing harm to the human body.
4. During the test, the power supply of the tester must be kept grounded, and the tester should not be in contact with other equipment to prevent electrical failure and fire.
5. During the test, the surface of the tester must be kept clean and dry to prevent impurities and moisture from affecting the test results.
Operating procedures:
1. Prepare test samples and mark and number them in accordance with standard requirements.
2. Place the test sample on the test bench of the tester, and adjust the height and angle of the test bench to meet the test requirements.
3. Set the parameters of the tester according to the standard requirements, such as ignition source, test time, test angle, etc.
4. Start the tester and perform the test according to the standard requirements.
5. During the test, observe the combustion of the test sample and record the test results.
6. When the test is complete, turn off the tester and clean the test bench and tester surfaces.
In short, the horizontal and vertical combustion tester is an important test equipment, which needs to comply with safety regulations and operating procedures to ensure the safety and accuracy of the test.