Company:Qinsun Instruments Co., Ltd
Email:info@qinsun-lab.com
Phone:
Tell:
Address:
The Porosimeter is a multi-functional instrument for measuring the bubble points, pore diameter, pore distribution, permeability and envelope area. The Instrument can be used for such as liquid permeability, breakthrough pressure, and integrity test. The test can be conducted under conditions of rising temperature, intensive chemical environment and under high pressure. The sample can withstand the compressive stress or repeated compression. The Porosimeter is applicable in various kinds of sample chambers, mobile sample chambers and chambers for various kinds of sample due to different configurations of the porosimeter. The instrument with proper test mode can conduct test fort high flow samples or low flow samples under rapid quality control mode or more precise researching mode.
Operation Principle
The wetting liquid fills the pores on the sample. At the same time, non-reactive gases can be applied to replenish the pores where the liquid flows out. Hence, it is possible to accurately measure the pressure and flow rate through the wet/dry sample, and calculate the characteristics of the pore structure.
Application
The customized porosimeter can be used in various industries, including filtration, pharmacy, chemistry products, hygiene, daily necessities, power source and paper industry. The multiple Chambers of PMI & multi-mode porometer and environmental control porometer are the two examples of customized stomata.
Applicable industries:
Automobile Battery separator Bio-tech
Chemistry Paper Filtration
Nonwoven Geofabric Pharmacy
Ceramics Architecture Textiles
Features
1. Multiple sample rooms for quick detection of sample characteristics.
2. Multi-test mode including QC (quality control) mode and precision mode.
3. Multiple test environments including elevated temperature, compressive stress and chemical environment.
4. Multiple sample chamber configurations.
5. Simple operation based on Microsoft software.
6. Automatic, easy to operate.
7. Minimum operator.
8. The test time is only a few minutes.
Technical Parameters
Items | Parameters |
Test pressure | Up to 500 psi (up to 2000psi with microflow) |
Flow | Up to 200SLPM (standard liter per minute) (up to 10000SLPM optional) |
Flow accuracy | Standard: 0.25 "-2.5" diameter (thickness up to 1.5 "); standard: 5 mm - 60 mm diameter (thickness up to 40 mm) (available for other dimensions) |
Pressure and flow resolution | 1/60000 |
Compression stress | Up to 1000psi |
Maximum detectable pore size | 1000μm |
Minimum detectable hole size | 0.013 mu m (0.004 mu m with microflow) |
Sample types | Panel, rod, tube, hollow fiber, tape, secretion, high flow sample, almost impermeable sample. |
Phone:+86-17740808215 Tell:+86-21-6780 0179 Address:No.2578 Minhang District Gu Dai Road, Shanghai Email:info@qinsun-lab.com sitemap