WelcomeWebsite! If you have any questions, please call !
Flammability tester,burning tester,Fire Retardant Fabrics Tester_QINSUN

Hotline:

Product

News

Company:-Qinsun Instruments Co., Ltd.
Phone:+86-17740808215
Tell:+86-21-6780 0179
Email:info@qinsun-lab.com
Address:No.2578 Minhang District Gu Dai Road, Shanghai

Flammability of Apparel Textiles

Position: Home > Technical

Flammability of Apparel Textiles

Author: Date :2019-07-26 Views: order
ASTM D1230  is used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire-risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.
Flammability of Apparel Textiles(图1)
 
The test method provides method of testing the flammability of textiles from or intended to be use for apparel,explains three classes of flammability,set forth the requirement for classifying textiles,and warns against the use of single or multilayer textiles,and warns against the use of single or multilayer textile fabrics that have burning characteristic considered by the trade to make them unsuitable for apparel.
 
The flamed specimen is held in the flammability tester at an angel of 45°,a standardized flam is applied to the surface near the lower end for 1±0.1s,and the time required for the flame to proceed up the fabric a distance of 127mm is recorded.Notation is made as to whether the base of a raised-surface fabric ignites,chars,melts,or fuses.
 

Phone:+86-17740808215 Tell:+86-21-6780 0179 Address:No.2578 Minhang District Gu Dai Road, Shanghai Email:info@qinsun-lab.com sitemap