The wire and cable bundle combustion tester is designed according to the requirements of UL1685 and GB18380.3 standards for wire and cable bundle combustion tests. And comply with IEC 60332-3-10, KS C IEC 60332-3-21-25 (Class A to D) standards. In addition, if the burner of this tester is adjusted by 20 degrees, it can meet the testing standards of IEEE 383 (IEEE 1202). The equipment can be equipped with a heat release instrument configuration port, which can be used in conjunction with a gas analysis device to measure thermal power values, such as H.R.R (heat release rate) and S P. R (smoke generation rate), etc.
Applicable scope:
The single vertical flammability tester for wires and cables is suitable for testing the flame retardant performance of the insulation layer of wires and cables under abnormal conditions such as overheating and overcurrent under flame conditions. It can be applied to the vertical flame spread test of wires, cables or optical cables, and can also verify the combustion status of droplets under flame conditions.
1. IEC 60332-3-10 Tests for cables and optical cables under fire conditions: Vertical flame propagation test for vertically installed bundled wires or cables;
2. EN 50399 General testing methods for cables under fire conditions;
3. GB/T18380.31-2008 and IEC60332-3-10-2000 "Fire tests for cables and optical cables under flame conditions - Part 31: Test report on vertical flame propagation of vertically installed bundled wires and cables - Test apparatus";
4. GB/T18380.32-2008/IEC60332-3-21:2000 "Fire tests for cables and optical cables under flame conditions - Part 32: Vertical flame propagation test for vertically installed bundled wires and cables - Class AF/R";
5. GB/T18380.33-2008/IEC60332-3-22:2000 "Fire tests for cables and optical cables under flame conditions - Part 33: Vertical flame propagation test for vertically installed bundled wires and cables - Class A";
6. GB/T18380.35-2008/IEC60332-3-24:2000 "Fire tests for cables and optical cables under flame conditions - Part 35: Vertical flame propagation test for vertically installed bundled wires and cables - Class C";
7. GB/T18380.36-2008/IEC60332-3-25:2000 "Fire tests for cables and optical cables under flame conditions - Part 36: Flame spread test for vertically installed bundled wires and cables - Class D";
User experience:
1. High level of intelligence and simple operation;
2. Professional industrial design, beautiful and elegant;
3. Accurate, safe, and stable equipment;
4. Micro computer control system, intelligent testing process; No need for manual timing and related operations;
5. Stainless steel corrosion-resistant housing.