

— News —
Service Hotline +86-13816217984 Email:info@standard-groups.com
Landline:+86(21)-64208466
Telephone:+86-13816217984
Address:Unit 3A, 20/F,Far East Consortium Building,121 Des Voeux Road Central, Hong Kong
Product News
time:2026-11-16 View:
The Full-Scale Room Corner Fire Test Apparatus consists of four main components: a combustion room, a smoke collection and gas sampling system, a gas analysis and data processing system, and a gas supply system.The apparatus is designed to simulate realistic fire scenarios originating at a room corner and evaluate the effects of wall and ceiling surface materials on fire spread. Based on the oxygen consumption principle, it measures critical parameters such as heat release rate (HRR) and smoke production. It is one of the standard fire testing methods that most closely approximates real-world fire conditions.

1. Traditional small-scale combustion tests primarily focus on the combustion characteristics of individual materials and cannot adequately reproduce complex interactions such as flame spread, smoke diffusion, and thermal feedback in actual spaces. The Full-Scale Room Corner Fire Test Apparatus uses a full-scale room as the test environment to simulate one of the most hazardous fire scenarios—fire originating at a building corner—and comprehensively reproduces the entire fire development process, from ignition and growth to flashover.
2. The heat output of the ignition source can be dynamically adjusted according to standard test procedures. During the first 10 minutes, the heat output is maintained at 100 kW to simulate an initial-stage fire. If flashover does not occur, the heat output is increased to 300 kW to accelerate fire development, closely matching the heat release characteristics of real fires.
3. Through multidimensional parameter acquisition, the apparatus enables comprehensive evaluation of material fire performance. The oxygen consumption principle is used to accurately measure the heat release rate and total heat release, which are critical indicators for assessing fire intensity and fire spread risk.
4. The gas analysis system continuously monitors the concentrations of toxic and hazardous gases, such as carbon monoxide (CO) and carbon dioxide (CO₂), to evaluate smoke toxicity. An optical smoke density meter measures smoke transmittance to assess visibility conditions during a fire. Meanwhile, multiple thermocouples and heat flux meters are installed at different locations to capture temperature distribution and thermal radiation intensity, providing data support for building fire protection design.
5. Full-scale room corner fire testing is one of the most authoritative verification methods for new building fire protection materials, fire-resistant construction systems, and flame-retardant technologies. For external thermal insulation systems, the materials can be installed on the test room walls according to actual construction practices to evaluate flame propagation rates along the insulation layer, heat release characteristics, and the fire integrity of the system.
6. For fire-resistant coatings, the apparatus provides direct verification of their thermal insulation performance and the stability of intumescent char layers under prolonged high-temperature exposure, helping determine whether they can effectively protect the underlying substrate.
7. The extensive and accurate test data generated by the apparatus serve as a foundation for developing and validating fire dynamics models. Researchers can analyze fire development curves for different material combinations to investigate flame spread and smoke flow patterns and optimize parameter settings in fire simulation software. In addition, special fire phenomena observed during testing, such as flashover and backdraft, provide scientific references for firefighting strategies and occupant evacuation route planning.
1. Thermoplastic Materials and Insulation-Decorative Integrated Panels
For materials such as thermoplastics and insulation-decorative integrated panels that cannot be accurately evaluated through small-scale testing, the apparatus can simulate their actual application conditions in buildings and test parameters such as flame spread performance and heat release rate. It helps determine whether these materials meet the requirements of standards such as GB/T 25207-2010 and provides compliance evidence for market access.
2. External Wall Thermal Insulation Systems
External wall thermal insulation systems are a key area of building fire prevention and control. The apparatus can evaluate the fire resistance, flame propagation characteristics, combustion performance of insulation materials, and effectiveness of fire protection structures under fire conditions. The results provide a technical basis for the design and selection of thermal insulation systems.
3. Fire Doors, Windows, and Curtain Wall Systems
Fire doors, windows, and curtain wall systems can be installed in the openings of the test room according to their actual installation configurations. Their integrity and thermal insulation performance under fire conditions can then be evaluated to verify their ability to effectively prevent flame and smoke propagation. The results provide data support for building fire compartmentation design.
4. Upholstered Furniture
Upholstered furniture, such as sofas and mattresses, is a common ignition source in residential and public buildings. The apparatus can simulate furniture combustion in a room and measure parameters such as heat release rate and smoke toxicity. These results help assess fire risks and guide improvements in flame-retardant product design, supporting compliance with standards such as GB/T 27904-2011.
5. Customized Furniture and Cabinet Systems
Customized furniture, including integrated kitchen cabinets and wardrobes, can be installed in the test room according to actual layouts. The apparatus evaluates flame propagation paths between furniture components and their heat release characteristics during a fire, providing references for overall fire performance assessment and safety-oriented furniture design.
6. Rail Transit and Aerospace Interior Materials
The fire performance of interior materials in rail transit vehicles and aerospace applications is directly related to passenger safety. The apparatus can simulate fire scenarios in enclosed spaces such as railway carriages and aircraft cabins to evaluate combustion rates, smoke toxicity, and heat release characteristics. The results help verify compliance with relevant industry standards and support material selection and certification for transportation interiors.
7. Energy Storage Batteries and Energy Storage Systems
With the development of the new energy industry, fire safety in energy storage systems has become increasingly important. The apparatus can be used to conduct fire tests on battery packs and energy storage cabinets, simulating external fire exposure and evaluating thermal runaway behavior.
Key parameters, including flame propagation rate, heat release intensity, and toxic gas emissions, can be measured to assess fire risks in energy storage systems. The test data provide technical support for battery pack structural design and thermal management system optimization.
Related Information