WelcomeWebsite! If you have any questions, please call !
Flammability tester,burning tester,Fire Retardant Fabrics Tester_QINSUN




Company:-Qinsun Instruments Co., Ltd.
Tell:+86-21-6780 0179
Address:No.2578 Minhang District Gu Dai Road, Shanghai

Pure water machine bucket cleaning

Position: Home > News

Pure water machine bucket cleaning

Author: Date :2024-01-26 Views: order

Cleaning method for pure water machine bucket:

(1) Power outage.

Unplug the power cord, remove the bucket, open the drain valve of the water dispenser, and drain the water in the dispenser.

(2) Drainage

Open the drain valve and drain the water stored in the machine body. The drain valve is generally located below the back of the water dispenser body. Drain the water from the hot and cold drain valves separately. Here, the author also reminds you to pay attention that it is best to lay a newspaper or cloth under the water dispenser to prevent wetting the floor. At the same time, due to the need for multiple cleaning inside the water dispenser, if conditions permit, it is more convenient to place the water dispenser in the bathroom for cleaning.

(3) Mix cleaning solution.

Mix the dedicated descaling agent for the water dispenser according to the instructions in the manual, then add it to the water dispenser, turn on the power, heat for five minutes, then turn off the power, and soak for 15-30 minutes.

(4) Heating.

The step of pouring into the water dispenser and heating is actually to allow the components in the cleaning agent to better react with the substances in the water. The main component of this cleaning agent used by the author to clean the water dispenser is chloro acids. When using, be careful not to let the solution come into contact with the skin as much as possible, and keep it away from children.

(5) Rinse the inner gallbladder

After the cleaning solution is left to stand in the water dispenser for 30 minutes, it is discharged separately from the cold and hot water outlets, and then poured into the water dispenser, repeating 3 to 5 times. The main purpose is to clean the cold and hot water outlets. Then discharge the cleaning solution from the cold and hot drain valve behind the machine.

(6) The cleaning solution is drained from the outlet.

Rinse the residual solution inside the water dispenser with clean water. Also, first add some water from the outlet to clean any remaining solution in the outlet. Then drain all the water from the drain valve. Repeat 3 to 5 times to clean thoroughly.

Phone:+86-17740808215 Tell:+86-21-6780 0179 Address:No.2578 Minhang District Gu Dai Road, Shanghai Email:info@qinsun-lab.com sitemap