This thermal radiation melting drop tester is designed to meet the technical specifications and requirements specified in international standards NF P92-505, EU 95/28/EC, ECE R118 Annex 7. It is used to measure and test the melting drop and combustion performance of M-grade building materials in accordance with the -505 standard.
Reference standards
NF P92-505 Fire resistance reaction droplet test for building materials
EU 95/28/EC European Parliament and the Council on the Combustion Performance of Materials in the Internal Structure of Certain Categories of Motor Vehicles of October 24, 1995
Combustion characteristics of ECE R118 Annex 7 automotive interior materials
Product application
The thermal radiation melting drop tester is suitable for testing the melting drop and combustion performance of hot melt materials under the action of the main heat source. It can test flexible and thin materials, as well as cellulose in warm flocs.
Product features
1. All fixtures are made of stainless steel material, which is beautiful and corrosion-resistant.
2. The radiation bracket can rotate at an angle greater than 90 degrees, making it easy to install the specimen.
3. The installation height of the sample can be adjusted.
4. Equipped with an electric radiator.
5. The radiation heat of the radiator is linearly adjustable, and the radiation heat is automatically adjusted through power control.
6. The radiation cover is a quartz glass cover with an opening diameter of 100mm ± 5mm.
7. The thermal radiation at a distance of 30mm from the plane under the radiation cover is 3W/cm?.
8. The sample holder is made of stainless steel rings with an inner diameter of 118mm.
9. The inner diameter of the receiving tray is 118mm, the depth is 12mm, and cotton is stuffed inside.
10. Automatic timing reminder for sample ignition.
technical parameter
Base size: 425 x 300mm
Power supply: single-phase 220V, 50Hz
Weight: 13kg
Maximum height of the instrument: 680mm