Flame retardant tester for the determination of flame retardant properties such as continual combustion, negative combustion and the tendency to char in medical protective clothing, curtains, coated products, laminated products etc.
Features.
1、Automatic electric heating wire ignition
2、Automatic timing of the burner, with automatic "push-pull" sample holder fixing device
3、Adjustable flame height, with flame height measuring device
4、With highly sensitive combustible gas leakage alarm device, if encountered, can automatically alarm and cut off the gas source
5、Gas source: propane or butane or LPG
Technical parameters
1、Vertical combustion test chamber material: stainless steel plate
2、Observers are made of glass
3、The bottom of the specimen clip is located 17mm above the igniter tube mouth point
4、Igniter: the inner diameter of the mouth of the tube is 11mm, the mouth of the tube is at an angle of 25 degrees to the vertical line
5、Ignition time: 0～999s±0.05S any setting
6、Range of continuous ignition timing: 0～999.9s, resolution 0.1s
7、Yin-fire timing range: 0～999.9s, resolution 0.1s
8、Power supply: 220V, 50Hz, 100W
9、Exterior size (L×W×H): 580mm×360mm×760mm
10、Weight: about 30Kg