Title: The Useful Tool for Spinning Process: Guide to Use of Yarn length measuring Instrument
Yarn length measuring Instrument is a key device in the spinning process that accurately detects the length of yarn to ensure the efficient, accurate and continuous spinning process. This guide will guide you to how you can use Yarn length measuring Instrument correctly.
Learn about Yarn length measuring Instrument
Yarn length measuring Instrument can measure yarn or fiber at a specific length, as required, for its average length, length deviation and other relevant parameters. You need to understand its basic working principles, which typically include both contact and contactless types. Contact devices are usually measured by direct contact yarn, while contactless devices are measured using optical or ultrasonic technology.
2. Preparation and calibration of equipment
Before using Yarn length measuring Instrument, proper preparation and calibration of the device is required first.
1. Equipment cleaning: Before use, make sure the equipment is clean, there is no dust or yarn residue, as these may affect the measurement accuracy.
Equipment calibration: calibration of equipment is also a very important step. Calibration of equipment is strictly followed by manufacturer's guidelines and steps.
Third, the preparation of yarn
When preparing yarn samples, you need to ensure the fairness of the sample. Try taking a few more samples to get a more accurate average.
4. The measurement process
1. Load yarn: according to the instructions of the equipment, the yarn or fiber is loaded into the measuring instrument. Make sure the device operates at the right speed and pressure when operating.
Set parameters: Set relevant measurement parameters, such as the length, speed of measurement, and other specific settings.
Start measurement: Turn on the device and make measurements. In the measurement process, strict compliance with the equipment operating procedures.
5. Reading of data
Read and record data: read and record measurements after the device is completed.
Interpretation of data: Understanding the meaning of data representation and the actual impact on yarn quality. Adjust the length, strength and other parameters of yarn as needed.
6. Equipment maintenance
The correct maintenance of the equipment is the key to ensuring its long-term stable operation. Regular cleaning and maintenance should be performed in accordance with the guidelines and timely inspection and maintenance should be found when the performance of the equipment is decreased.
Yarn length measuring Instrument is a sophisticated device that provides a highly efficient and reliable measurement tool for spinning plants. With the right use and maintenance, you can ensure that Yarn length measuring Instrument is always in the best condition, providing accurate data for your spinning production line, optimizing product quality and improving productivity.